HOW TO USE:
On/Off power button:
1. To turn battery on or off, simply rotate the knurled ring in the direction as shown in the photo.
2. When Mekanik™ is new the ring may be tight. Simply press the firing button down a little, and rotate the ring. After a few uses, it will loosen up.
Positive Pin and Battery Adjuster:
1. The upper adjust pin is for smaller batteries. If an 18350 battery fits loose after screwing the battery tubes down, adjust this pin to take out any excess play.
2. The lower screw-pin is to help mate the atomizer to the battery. Unscrew the lower screw a few turns. Next screw the atomizer system of your choice onto the top cap. Then screw the lower pin down until you feel it hit the positive pin on your atomizer system. Reassemble the top cap onto the tubes, and vape away.
Adjustable Telescoping Tube:
Remove firing button on the bottom of your MOD. Drop your battery in the tube – put the firing button back on, make sure not to over tighten – just enough to lock everything together for good contact.
Twist the body of the Mekanik to adjust for the size of battery. Tube will support battery sizes 18650 through 18350. Your Mekanik™ is now ready to use.
|User Guide||Mekanik User Guide.pdf|